|
|
| |

Days and dates are tentative
and subject to change based on enrollments.
|
Electrical Seminars |
| |
If you are a “Limited” or “Masters” licensed electrician in the state of Delaware, our continuing education classes are approved for license renewal.
Sign up now for your classes at Sussex Tech.Grounding Electrical Systems/Swimming Pools/Spas ~5-hour seminar
This class has
been updated to the 2008 Code. This seminar will cover
the proper grounding of electrical systems, swimming
pools/spas and equipment operating at 600 volts or less.
This class qualifies for five (5) hours of continuing
education. A 2008 NEC book is required.
|
March 15,
2011 |
|
Tu |
|
5 - 10 pm |
|
#WES311 |
|
$75 |
National Electrical Code Update ~5-hour seminar
This course will cover
the most important changes to the new code. This class
qualifies for five (5) hours of continuing education
required for license renewal. A 2008 NEC book is
required.
|
February 14, 2011 |
|
M |
|
5 - 10 pm |
|
#WES211
|
|
$75 |
|
May 19,
2011 |
|
Th |
|
5 - 10 pm |
|
#WES511 |
|
$75 |
Common Violations of the National Electrical Code ~5-hour seminar
This workshop is a comprehensive study of common
violations of the National Electrical Code. This class
qualifies for five (5) hours of continuing education. A
calculator and 2008 NEC book is required.
|
April
13, 2011 |
|
W |
|
5 - 10 pm |
|
#WES411
|
|
$75 |
|
|
Early Care and
Education I - TECE I ~ 72 hours
If you are thinking about working with young
children, then this course is for you. This course
is approved thru child care licensing in Delaware
and the hours can be applied toward re-licensure or
CDA (Child Development Associate) credentials.
Tuition costs include pretesting, textbook and all
course materials.
Note: This course is not available to state
registered apprentices.
|
October 4, 2010 - January 13,
2011 |
|
M
& W |
|
6:30 - 9:30 pm |
|
#WEC1010 |
|
$310 |
|
Early Care and
Education II -TECE II ~ 72 hours
This course builds on Early Care and Education I and
is approved thru child care licensing in Delaware
and the hours can be applied toward re-licensure or
CDA (Child Development Associate) credentials.
Tuition costs include pretesting, textbook and all
course materials.
Note: This course is not available to state
registered apprentices.
|
January 19, 2011-April 18, 2011 |
|
M
& W |
|
6:30 - 9:30 pm |
|
#WEC111 |
|
$310 |
|
HVAC Technician Refrigerant Recovery Testing and Certification Seminar ~ 14
hours
|
| |
Type I, II, III, or Universal certifications available. If you have a need to become certified or just to retest in one area to expand your certification, this is the course for you. The course cost includes textbook and test fee. Retest only fee is
$60.
|
October 14, 19, 21, 26,
2010 |
|
Tu & Th |
|
6 - 9:30 |
|
#WRR1010 |
|
$145 |
|
EPA Approved test:
October 26th |
|
March 1, 3, 8, 10, 2011 |
|
Tu & Th |
|
6 - 9:30 |
|
#WRR311 |
|
$145 |
|
EPA Approved test: March
10th |
|
|
Learn to Weld ~ 72 hours |
| |
Whether you are a beginner or have some welding experience, you can benefit from the hands-on instruction. Learn from the one-on-one guidance of your instructor. Stick, Gas, MIG, or TIG available. This class is restricted to 13 students and fills up fast. Call now to
reserve your spot (302) 856-9035.
Note: Gloves and safety glasses are required (may be purchased at the school). Appropriate footwear is required.
|
Oct 5, 2010 - Jan 18,
2011
|
|
Tu & Th |
|
6:30 - 9:30 |
|
#WTW1010 |
|
$425 |
|
Jan 20, 2011 - Apr12,
2011 |
|
Tu & Th |
|
6:30 - 9:30 |
|
#WTW111 |
|
$425 |
|
|
Intro to Programmable Logic Controllers
~60 hours |
| |
This course utilizes Allen-Bradley software and will cover PLC Electrical Safety, Hardware, Ladder Logic Theory, Programming Instructions: Inputs, Outputs, Bit, Timer & Counters, Math functions, Networks, Troubleshooting and Servicing the PLC System and more . (60
Hours of combined lecture and hands on lab).
• A basic knowledge of the fundamentals of electricity including series/parallel circuits and motor control recommended.
|
October 5, 2010 -
January 4, 2011 |
|
Tu & Th |
|
6:30 - 9:30 |
|
#WPLC1010 |
|
$399 |
|
January
6, 2011 - March 15, 2011 |
|
Tu & Th |
|
6:30 - 9:30 |
|
#WPLC111 |
|
$399 |
|
|
|
 |
Thermal Imaging
Technology - Fluke Ti25 Thermal Imager
~ 12 hours |
| |
*Prerequisites: General Knowledge of computers and word
processors. Digital camera operation a plus but not
required.
|
In this class you will:
|
| |
Learn to operate the Imager/Camera unit. |
| |
Learn to store and transfer data. |
| |
Learn to use the related SmartView software to
analyze and report results.
|
|
These skills are used for: |
| |
Energy Audits - find missing insulation, hot and
cold spots, air infiltration and uneven heating
and cooling. Pinpoint problems for immediate
results and weatherization. |
| |
Plant maintenance - scan for shorts and hot
spots in electrical panels, heating systems,
steam traps and equipment bearings and drives.
Find problems before a failure. |
|
October 18 - 26, 2010 |
|
M & Tu |
|
5:30 - 8:30 pm
|
|
#GTI910
|
|
$225 |
|
November 1 - 9, 2010 |
|
M & Tu |
|
5:30 - 8:30 pm |
|
#GTI911 |
|
$225 |
|
This class can be
offered at any
industrial facility,
please call 302-856-9035
for details. |
|
| |
|
Solar
Panel Design and Installation - Photovoltaics
~ 30 hours |
| |
Learn
about the use of solar panels to generate electricity
and heat water.
Solar Panel history, electrical circuits, solar
radiation fundamentals, sizing of systems, DC/AC,
required wiring, isolated and grid tied systems.
Installation of stand alone and roof mounted panels.
Uses Solar Energy International textbook in conjunction
with classroom and field exercises. Book included in
cost of course.
|
October 4 - November 3, 2010 |
|
M & W |
|
5:30 - 8:30 pm
|
|
#GSO910
|
|
$565 |
|
November 8 - December
13, 2010 |
|
M & W |
|
5:30 - 8:30 pm |
|
#GSO911
|
|
$565 |
|
| |
|
Green Environment and
Green Building Standards
~ 15 hours |
| |
If
you want to learn more about “Green Building,” this
course provides instruction in green environment,
construction practices, building science and green
building LEED rating systems. Endorsed as the
preparatory course for the “Green Advantage”
Commercial/Residential certification exam. The course is
taught by National Center for Construction Education and
Research (N.C.C.E.R.) instructor.
|
October 5 - November 2,
2010 |
|
Tu |
|
5:30 - 8:30 pm
|
|
#GGB910
|
|
$250 |
|
| |
|
Weatherization
Techniques I
~
15
hours |
| |
Utilizes the Weatherization curriculum furnished by the
National Weatherization Assistance Organization. Learn
the latest methods and the following skills:
Chicago Blower Door kit - set up and use to test results
from repairs and upgrades to buildings and houses.
Caulking and Sealing - proper methods after testing of
building and enclosure. Includes sealing around all
openings internal and external. New practices of
caulking all joints and wall joints are covered.
Window replacements - selection and installation of
energy efficient window systems.
Insulation - selection and installation of different
types of insulation. Fiberglass, blown and spray
insulation.
|
October 6 - November 3, 2010 |
|
W |
|
5:30 - 8:30 pm
|
|
#GWT910
|
|
$250 |
|
| |
|
Weatherization
Techniques II
~ 15 hours |
| |
Utilizes the Weatherization curriculum furnished by the
National Weatherization Assistance Organization. Learn
latest methods and the following skills:
Whole House as a system - From the attic the the crawl
space and all openings in between. The proper green
methods of sealing and closure. Proper and improper
ventilation and moisture barriers are stressed, both
former methods and new techniques.
HVAC loadings and calculations - How much air is moved,
in what direction and how many BTU’s are required to
heat or cool the environment. Calculate the loss and the
savings of any improvements.
Appliances and Energy Star equipment - why change the
house and the building if you are leaving the old energy
robbing equipment in place? Learn the ratings and the
ways to save money with some simple changes or the
replacement of the entire HVAC system
|
November 10 - December
15, 2010 |
|
W |
|
5:30 - 8:30 pm
|
|
#GWT911
|
|
$250 |
|
| |
|
 |
| |
The Office of
Continuing Education (CEd) offers online career training
courses in partnership with Gatlin Education
Services. These are career-focused online
courses designed to give you the latest in learning, and
to provide the skills necessary to acquire professional
caliber positions in many in-demand occupations.
Our self-paced courses
are available anytime, anywhere. All you need is a
web-enabled computer and a desire to learn skills that
will prepare you for a new career or update current
skill sets. And even though you don’t have to attend
class, you won’t be on your own. A team of available
online professionals, anytime scheduling, and
educational textbooks combine to give you a relevant,
interactive learning experience.
For registration
information, call (302) 856-9035 or visit us on the
internet at
www.gatlineducation.com/sussextech.
Please note:
There are no discounts for online courses.
|
|